Violation Detail
Standard Cited: 19100147 C04 II B The control of hazardous energy (lockout/tagout).
Inspection Nr: 1714263.015
Citation: 01003A
Citation Type: Serious
Abatement Date: 06/27/2024 2
Initial Penalty: $8,873.00
Current Penalty: $8,873.50
Issuance Date: 05/29/2024
Nr Instances: 3
Nr Exposed: 5
Related Event Code (REC): A
Gravity: 5
Report ID: 0521100
Contest Date:
Final Order: 06/18/2024
Emphasis:
Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
---|---|---|---|---|---|---|
Penalty | I: Informal Settlement | 06/18/2024 | $8,873.50 | 06/27/2024 | Serious | |
Penalty | Z: Issued | 05/29/2024 | $8,873.00 | 06/27/2024 | Serious |
Text For Citation: 01 Item/Group: 003A Hazard:
29 CFR 1910.147(c)(4)(ii)(B): The procedures shall clearly and specifically outline the scope, purpose, authorization, rules, and techniques to be utilized for the control of hazardous energy, and the means to enforce compliance including specific procedural steps for shutting down, isolating, blocking and securing machines or equipment to control hazardous energy. a) On and before December 5, 2023, with respect to an establishment located 616 N. Perkins St, Appleton, WI 54914, employees performing service and maintenance work in the Rough Mill, on the Resaw Infeed carriage, were not protected from all hazardous energy sources due to the gravitational energy of the carriage not being accounted for on the written energy control procedure. b) On and before December 5, 2023, with respect to an establishment located 616 N. Perkins St, Appleton, WI 54914, employees performing service and maintenance work in the Rough Mill, on the Resaw Stacker carriage, were not protected from all hazardous energy sources due to the gravitational energy of the carriage not being accounted for on the written energy control procedure. c) On and before December 5, 2023, with respect to an establishment located 616 N. Perkins St, Appleton, WI 54914, employees performing service and maintenance work in the Rough Mill, on the Multi-saw Stacker table, were not protected from all hazardous energy sources due to the gravitational energy of the table not being accounted for on the written energy control procedure.