Translate
Violation Detail
Standard Cited: 19100107 C06 Spray finishing using flammable and combustible materials.
This violation item has been deleted.
Inspection Nr: 1650542.015
Citation: 01002A
Citation Type: Serious
Abatement Date: 08/24/2023
Initial Penalty: $6,250.00
Current Penalty: $0.00
Issuance Date: 07/31/2023
Nr Instances: 1
Nr Exposed: 6
Related Event Code (REC):
Gravity: 5
Report ID: 0830600
Contest Date:
Final Order: 08/30/2023
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 08/30/2023 | $0.00 | 08/24/2023 | Serious | |
| Penalty | Z: Issued | 07/31/2023 | $6,250.00 | 08/24/2023 | Serious |
Text For Citation: 01 Item/Group: 002A Hazard:
29 CFR 1910.107(c)(6): The employer did not ensure that electrical wiring and equipment subject to deposits of combustible residues but located in a spraying area as herein defined were explosion-proof type approved for Class I, group D locations and did not ensure that they otherwise conform to the provisions of subpart S of this part, for Class I, Division 1, Hazardous Locations. Electrical wiring, motors, and other equipment outside of but within twenty (20) feet of any spraying area, and not separated therefrom by partitions, did not conform to the provisions of subpart S of this part for Class I, Division 2 Hazardous Locations: a) On or about February 10, 2023, and at times prior, employees were exposed to fire and explosion hazards while working in the coating and painting spray booths where a KBPC-240D Variable Speed-Torque SCR DC Motor Control to control the "Rotisserie" machines that was not explosion proof or approved for Class I group D or conform to Class I Division I hazardous locations.