Violation Detail
Standard Cited: 19100212 A03 III General requirements for all machines.
Inspection Nr: 1568360.015
Citation: 01003B
Citation Type: Serious
Abatement Date: 08/01/2022 2
Initial Penalty: $0.00
Current Penalty: $0.00
Issuance Date: 03/18/2022
Nr Instances: 1
Nr Exposed: 3
Related Event Code (REC):
Gravity: 10
Report ID: 0522000
Contest Date:
Final Order: 03/30/2022
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 03/30/2022 | $0.00 | 08/01/2022 | Serious | |
| Penalty | Z: Issued | 03/18/2022 | $0.00 | 08/01/2022 | Serious |
Text For Citation: 01 Item/Group: 003B Hazard:
29 CFR 1910.212(a)(3)(iii): Special handtools for placing and removing material shall be such as to permit easy handling of material without the operator placing a hand in the danger zone. Such tools shall not be in lieu of other guarding required by this section, but can only be used to supplement the protection provided. a) On or about December 13, 2021, employees working in Forging Department Lines 1 and 3 were exposed to amputation hazards while utilizing spray wands tools in lieu of guarding around the Kuritomo C2F-2500W Mechanical Forging Presses. Employees were required to spray the lubricant during the machine cycle and were exposed to amputation hazards at the point of operation.
Translate