Violation Detail
Standard Cited: 19100219 C04 I Mechanical power-transmission apparatus.
Inspection Nr: 1565265.015
Citation: 01001
Citation Type: Serious
Abatement Date: 03/15/2022 2
Initial Penalty: $13,052.00
Current Penalty: $6,526.00
Issuance Date: 01/26/2022
Nr Instances: 1
Nr Exposed: 10
Related Event Code (REC):
Gravity: 10
Report ID: 0522000
Contest Date:
Final Order: 02/09/2022
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 02/09/2022 | $6,526.00 | 03/15/2022 | Serious | |
| Penalty | Z: Issued | 01/26/2022 | $13,052.00 | 03/15/2022 | Serious |
Text For Citation: 01 Item/Group: 001 Hazard:
29 CFR 1910.219(c)(4)(i):Projecting shaft ends shall present a smooth edge and end and shall not project more than one-half the diameter of the shaft unless guarded by nonrotating caps or safety sleeves. a) On or before 11/16/2021 the employer did not ensure that a 1 1/4 inch protruding rotating shaft for the Line 1 Down Cutter located at ground level was properly guarded by a nonrotating cap or safety sleeve.
Translate