Translate
Violation Detail
Standard Cited: 19100023 C10 Ladders.
Inspection Nr: 1557602.015
Citation: 01001B
Citation Type: Serious
Abatement Date: 3
Initial Penalty: $0.00
Current Penalty: $0.00
Issuance Date: 04/01/2022
Nr Instances: 1
Nr Exposed: 1
Related Event Code (REC): A
Gravity: 10
Report ID: 0317500
Contest Date:
Final Order: 04/27/2022
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 04/27/2022 | $0.00 | Serious | ||
| Penalty | Z: Issued | 04/01/2022 | $0.00 | Serious |
Text For Citation: 01 Item/Group: 001B Hazard:
29 CFR 1910.23(c)(10): The employer did not ensure that the top of a non-self-supporting ladder is placed so that both side rails are supported, unless the ladder is equipped with a single support attachment: a) Jobsite, parking lot area, 9365 McKnight Road, Pittsburgh, PA 15237: On or about October 12, 2021, an employee was using a 16-foot Werner brand aluminum extension ladder (model number: D1116-2) to paint a light pole. Both ends of the ladder side rails could not be supported by the pole because the pole was only approximately 4 inches in length and width. Per the manufacturer, the extension ladder was not designed for use with a pole lash, strap, or a v-rung.