Violation Detail
Standard Cited: 19100212 A01 General requirements for all machines.
Inspection Nr: 1543108.015
Citation: 02001
Citation Type: Repeat
Abatement Date: 09/24/2021 2
Initial Penalty: $0.00
Current Penalty: $0.00
Issuance Date: 09/14/2021
Nr Instances: 2
Nr Exposed: 4
Related Event Code (REC):
Gravity: 5
Report ID: 1032100
Contest Date:
Final Order: 10/27/2021
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | Z: Issued | 09/14/2021 | $0.00 | 09/24/2021 | Repeat |
Text For Citation: 02 Item/Group: 001 Hazard:
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: a) Maintenance Shop - On or about July 19, 2021, employees operated a 18 inch variable speed drill press manufactured by Powermatic (model: 2800, serial number: 6100007). The point of operation was not guarded to protect the operator from the rotating chuck and swarf produced during operation, exposing employees to flying swarf and caught-in hazards. b) Maintenance Shop - On or about July 19, 2021, employees operated a 10 inch table saw manufactured by Bosch (model TS2000, Serial number: 69018 3867) for cutting operations. The table saw was not provided a guard to protect operators from inadvertent contact with the blade at the point of operation, exposing employees to caught-in hazards. The National Oceanic and Atmospheric Administration (NOAA) was previously cited for a violation of this occupational safety and health standard or its equivalent standard 1910.212(a)(1), which was contained in OSHA inspection number 1216287, citation number 1, item number 2 and was affirmed as a final order on April 17, 2017 with respect to a workplace located at 7851 Dean Martin Drive in Las Vegas, Nevada.
Translate