Violation Detail
Standard Cited: 5A0001 OSH Act General Duty Paragraph
Inspection Nr: 1522217.015
Citation: 01001
Citation Type: Serious
Abatement Date: 12/31/2025 2
Initial Penalty: $13,653.00
Current Penalty: $14,502.00
Issuance Date: 09/27/2021
Nr Instances: 1
Nr Exposed: 2
Related Event Code (REC): A
Gravity: 10
Report ID: 0830500
Contest Date: 10/12/2021
Final Order: 12/15/2022
Emphasis:
Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
---|---|---|---|---|---|---|
Penalty | F: Formal Settlement | 12/15/2022 | $14,502.00 | 12/31/2025 | Serious | |
Penalty | C: Contested | 11/08/2021 | $13,653.00 | 10/22/2021 | Serious | |
Penalty | Z: Issued | 09/27/2021 | $13,653.00 | 10/22/2021 | Serious |
Text For Citation: 01 Item/Group: 001 Hazard:
OSH ACT of 1970 Section (5)(a)(1): The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to struck-by and crushing hazards: a) a) On or about March 27, 2021, the employer failed to ensure proper use of the JET PT Series Manual Trolley (stock # 252005). Deficiencies include: 1. A missing trolley end stop on the load bearing I-beam; 2. Unknown I-beam load capacity; and 3. Exceeding the trolley?s rated load capacity. The trolley disconnected from the I-beam and dropped its load. This exposed employees to struck by and crushing hazards. Abatement Note: Among other methods, reasonable and feasible means of abatement for this hazard include: 1. Install trolley stop on each end of the monorail I-Beams in the hides facility following the American Society of Mechanical Engineers (ASME) standard for Cranes and Monorails (with underhung trolley or bridge), ASME B30.17-2020, Section 17-1.9.2, Trolley Stops. 2. Only hang loads from beams in the Hide Plant facility with a known rated load capacity exceeding the load. 3. Install and operate the trolley system per the American Society of Mechanical Engineers (ASME) standard for Overhead, Underhung and Stationary Hoists. ASME B30.16- 2017, Section 16-1.3.2, Support.