Violation Detail
Standard Cited: 19100213 F01 Woodworking machinery requirements.
Inspection Nr: 1514967.015
Citation: 01003B
Citation Type: Serious
Abatement Date: 06/07/2021 2
Initial Penalty: $7,510.00
Current Penalty: $0.00
Issuance Date: 05/07/2021
Nr Instances: 1
Nr Exposed: 2
Related Event Code (REC):
Gravity: 5
Report ID: 0521100
Contest Date:
Final Order: 08/06/2021
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 08/06/2021 | $0.00 | 06/07/2021 | Serious | |
| Penalty | Z: Issued | 05/07/2021 | $7,510.00 | 06/07/2021 | Serious |
Text For Citation: 01 Item/Group: 003B Hazard:
29 CFR 1910.213(f)(1): Feed rolls and saws shall be protected by a hood or guard to prevent the hands of the operator from coming in contact with the in-running rolls at any point. The guard shall be constructed of heavy material, preferably metal, and the bottom of the guard shall come down to within three-eighths inch of the plane formed by the bottom or working surfaces of the feed rolls. This distance (three-eighths inch) may be increased to three-fourths inch, provided the lead edge of the hood is extended to be not less than 5 1/2 inches in front of the nip point between the front roll and the work: At a facility located at 7005 Rickyval Street, Weston, WI 54476; the feed rolls and saw blades of the Mereen-Johnson gang rip saw (Model #435H, S# MJ2773) were not protected by a hood or guard to prevent the hands of saw operators from coming into contact with the in-running nip points of the hold down rolls on the infeed and outfeed side of the saw, or saw blades.
Translate