Violation Detail
Standard Cited: 19100213 F02 Woodworking machinery requirements.
Inspection Nr: 1514967.015
Citation: 01003A
Citation Type: Serious
Abatement Date: 06/07/2021 2
Initial Penalty: $10,513.00
Current Penalty: $7,359.10
Issuance Date: 05/07/2021
Nr Instances: 1
Nr Exposed: 2
Related Event Code (REC): R
Gravity: 10
Report ID: 0521100
Contest Date:
Final Order: 08/06/2021
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 08/06/2021 | $7,359.10 | 06/07/2021 | Serious | |
| Penalty | Z: Issued | 05/07/2021 | $10,513.00 | 06/07/2021 | Serious |
Text For Citation: 01 Item/Group: 003A Hazard:
29 CFR 1910.213(f)(2): Each self-feed circular ripsaw shall be provided with sectional non-kickback fingers for the full width of the feed rolls. They shall be located in front of the saw and so arranged as to be in continual contact with the wood being fed: At a facility located at 7005 Rickyval Street, Weston, WI 54476; the Mereen-Johnson gang rip saw (Model #435H, S# MJ2773) was not provided with non-kickback fingers while employees used the saw to cut plywood sheets. An employee was exposed to struck-by hazards and was hospitalized due to a piece of plywood that entered the saw and kicked back injuring the employee.
Translate