Violation Detail
Standard Cited: 19100212 A03 II General requirements for all machines.
This violation item has been deleted.
Inspection Nr: 1507101.015
Citation: 01001A
Citation Type: Serious
Abatement Date: 02/16/2021 2
Initial Penalty: $12,145.00
Current Penalty: $0.00
Issuance Date: 01/15/2021
Nr Instances: 3
Nr Exposed: 4
Related Event Code (REC): R
Gravity: 10
Report ID: 0636900
Contest Date:
Final Order: 04/06/2021
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 04/06/2021 | $0.00 | 02/16/2021 | Serious | |
| Penalty | Z: Issued | 01/15/2021 | $12,145.00 | 02/16/2021 | Serious |
Text For Citation: 01 Item/Group: 001A Hazard:
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s): Employees that operate Hobart band saw model number 6801-serial number 27-1173-593, were exposed to amputation hazard when cutting various types of meats on the following instances: 1. On or about December 6, 2020, and times prior to, employee was operating band saw, Hobart band saw model number 6801-serial number 27-1173-593, when his middle and ring fingertips were amputated. 2. On or about December 16, 2020, and times prior to, employee was operating the bandsaw, Hobart band saw model number 6801-serial number 27-1173-593, with the adjustable guard set higher than the one-quarter of an inch stated in the posted sign above the band saw. 3. On or about December 22, 2020, and times prior to, employee was operating the bandsaw, Hobart band saw model number 6801-serial number 27-1173-593, with the adjustable guard set higher than the one-quarter of an inch stated in the posted sign above the band saw.
Translate