Violation Detail
Standard Cited: 19100305 G02 III Wiring methods, components, and equipment for general use.
Inspection Nr: 1503865.015
Citation: 01002
Citation Type: Serious
Abatement Date: 02/10/2021 2
Initial Penalty: $0.00
Current Penalty: $0.00
Issuance Date: 01/14/2021
Nr Instances: 2
Nr Exposed: 4
Related Event Code (REC):
Gravity: 5
Report ID: 0316300
Contest Date:
Final Order: 02/10/2021
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | Z: Issued | 01/14/2021 | $0.00 | 02/10/2021 | Serious |
Text For Citation: 01 Item/Group: 002 Hazard:
29 CFR 1910.305(g)(2)(iii):Flexible cords were not connected to devices and fittings so that tension would not be transmitted to joints or terminal screws: a) Assateague Island National Seashore Virginia Carpenter Shop: On or about 11/13/2020, the flexible cord attached to the Jet table saw was pulled away from its housing thereby causing tension on the terminal screws. b) Assateague Island National Seashore Virginia Carpenter Shop: On or about 11/13/2020, the flexible cord to the Rockwell pedestal drill press, the outer insulation was pulled away from the male attachment plug thereby causing tension on the terminal screws. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Translate