Violation Detail
Standard Cited: 19100147 C04 II The control of hazardous energy (lockout/tagout).
This violation item has been deleted.
Inspection Nr: 1498231.015
Citation: 01001A
Citation Type: Serious
Abatement Date: 02/22/2021
Initial Penalty: $10,728.00
Current Penalty: $0.00
Issuance Date: 01/21/2021
Nr Instances: 1
Nr Exposed: 1
Related Event Code (REC): R
Gravity: 5
Report ID: 0524500
Contest Date: 02/18/2021
Final Order: 03/03/2022
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | F: Formal Settlement | 03/03/2022 | $0.00 | 02/22/2021 | Serious | |
| Penalty | C: Contested | 02/24/2021 | $10,728.00 | 02/22/2021 | Serious | |
| Penalty | Z: Issued | 01/21/2021 | $10,728.00 | 02/22/2021 | Serious |
Text For Citation: 01 Item/Group: 001A Hazard:
29 CFR 1910.147(c)(4)(ii): The procedures shall clearly and specifically outline the scope, purpose, authorization, rules, and techniques to be utilized for the control of hazardous energy, and the means to enforce compliance including, but not limited to, the following: 29 CFR 1910.147(c)(4)(ii): The energy control procedures did not clearly and specifically outline the scope, purpose, authorization, rules, and techniques to be utilized for the control of hazardous energy, including, but not limited to Items of this section: On or about October 13, 2020, Sanitation Employees were exposed to caught-in and amputation hazards from performing servicing and maintenance activities, including but not limited to conveyor equipment, and the employer did not developed specific procedures that outline the scope, purpose, authorization, rules, and techniques to be utilized for the control of hazardous energy. The procedures shall clearly outline: a. A specific statement of the intended use of the procedure, b. Specific procedural steps for shutting down, isolating, blocking and securing machines or equipment to control hazardous energy, c. Specific procedural steps for the placement, removal and transfer of lockout devices and the responsibility for them, and d. Specific requirements for testing a machine or equipment to determine and verify the effectiveness of lockout devices, tagout devices, and other energy control measures.
Translate