Violation Detail
Standard Cited: 19100028 B03 II Duty to have fall protection and falling object protection.
Inspection Nr: 1493714.015
Citation: 01001
Citation Type: Serious
Abatement Date: 11/06/2020 2
Initial Penalty: $10,603.00
Current Penalty: $7,500.00
Issuance Date: 10/13/2020
Nr Instances: 1
Nr Exposed: 5
Related Event Code (REC): R
Gravity: 5
Report ID: 0316700
Contest Date:
Final Order: 11/05/2020
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 11/05/2020 | $7,500.00 | 11/06/2020 | Serious | |
| Penalty | Z: Issued | 10/13/2020 | $10,603.00 | 11/06/2020 | Serious |
Text For Citation: 01 Item/Group: 001 Hazard:
29 CFR 1910.28(b)(3)(ii): The employer did not ensure each employee is protected from tripping into or stepping into or through any hole that is less than 4 feet (1.2 m) above a lower level by covers or guardrail systems: a) Printing Press #972 - Employees working from the moveable deck of printing press #972 were not protected from stepping into a floor hole which measured a minimum 2 ¼ inches wide up to approximately 16 inches wide at the time an employee was injured while attempting to step over the hole, on or about September 12, 2020. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Translate