Violation Detail
Standard Cited: 19100147 D The control of hazardous energy (lockout/tagout).
This violation item has been deleted.
Inspection Nr: 1472344.015
Citation: 01001
Citation Type: Serious
Abatement Date: 3
Initial Penalty: $13,494.00
Current Penalty: $0.00
Issuance Date: 08/20/2020
Nr Instances: 1
Nr Exposed: 1
Related Event Code (REC):
Gravity: 10
Report ID: 0521700
Contest Date: 09/10/2020
Final Order: 02/22/2021
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | F: Formal Settlement | 02/22/2021 | $0.00 | Serious | ||
| Penalty | C: Contested | 09/11/2020 | $13,494.00 | Serious | ||
| Penalty | Z: Issued | 08/20/2020 | $13,494.00 | Serious |
Text For Citation: 01 Item/Group: 001 Hazard:
29 CFR 1910.147(d): The established procedure for the application of energy control (the lockout or tagout procedures) did not cover the actions listed in and was not done in sequence as required by 29 CFR 1910.147(d)(1)-(6):(a) a. On or about April 10, 2020, at the above addressed worksite, the Gamma 958 Spindle Winder was not shut down or turned off prior to engaging in these servicing and maintenance activity. As a result, the remaining applicable energy control elements, involving machine isolation [1910.147(d)(3)], lockout/tagout device application [1910.147 (d)(4)], dissipation of residual energy [1910.147 (d)(5)(i)], and verification of isolation [1910.147 (d)(6)] were not implemented to protect employees from machine servicing and maintenance hazards.
Translate