Violation Detail
Standard Cited: 19260760 C03 Fall protection.
Inspection Nr: 1458046.015
Citation: 01002
Citation Type: Serious
Abatement Date: 03/16/2020 2
Initial Penalty: $1,735.00
Current Penalty: $1,735.00
Issuance Date: 03/04/2020
Nr Instances: 1
Nr Exposed: 2
Related Event Code (REC):
Gravity: 1
Report ID: 0522500
Contest Date:
Final Order: 03/30/2020
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | Z: Issued | 03/04/2020 | $1,735.00 | 03/16/2020 | Serious |
Text For Citation: 01 Item/Group: 002 Hazard:
29 CFR 1926.760(c)(3): The boundaries of a CDZ shall be designated and clearly marked. The CDZ shall not be more than 90 feet (27.4 m) wide and 90 (27.4 m) feet deep from any leading edge. The CDZ shall be marked by the use of control lines or the equivalent. Examples of acceptable procedures for demarcating CDZ's can be found in Appendix D to this subpart. a. Bacom Inc., At a worksite located at 1280 London Groveport Road, Lockborne, Ohio, 43137: On and/or preceding January 23, 2020, the employer did not ensure that the controlled decking zone did not exceed 90 feet (27.4 m) wide and 90 (27.4 m) feet deep from any leading edge. Employees were shaking out and making the initial securement of roof decking to the top of the roof joists and girders where the controlled decking zone was 310 feet by 112 feet.
Translate