Violation Detail
Standard Cited: 19100212 A01 General requirements for all machines.
Inspection Nr: 1451089.015
Citation: 01001
Citation Type: Serious
Abatement Date: 3
Initial Penalty: $9,446.00
Current Penalty: $5,000.00
Issuance Date: 04/21/2020
Nr Instances: 4
Nr Exposed: 4
Related Event Code (REC):
Gravity: 10
Report ID: 0213900
Contest Date: 06/15/2020
Final Order: 09/14/2020
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | J: ALJ Decision | 09/14/2020 | $5,000.00 | Serious | ||
| Penalty | C: Contested | 06/23/2020 | $9,446.00 | Serious | ||
| Penalty | Z: Issued | 04/21/2020 | $9,446.00 | Serious |
Text For Citation: 01 Item/Group: 001 Hazard:
29 CFR 1910.212(a)(1): Machine guarding was not provided to protect operator(s) and other employees from hazard(s) created by ingoing nip points and rotating parts: a) COMARCO PRODUCTS, INC. - Slicer area: Guards were not provided near the slicer area where a gap between conveyor tables created a pinch point, observed on or about 12/04/2019. b) COMARCO PRODUCTS, INC. - Breading Area: Guards were not provided for a spindle, observed on or about 12/04/2019. c) COMARCO PRODUCTS, INC. - Fryer Area: Guards were not placed on the stove flames of the production line, observed on or about 12/04/2019. d) COMARCO PRODUCTS, INC.- Turning table after breading Area: A pinch point was created by missing roll parts the end of the Rex-Turn Conveyor belt Model #816-34R90-068, S/N 816-34-0038 and damaged mesh which caused an amputation, occurred on or about 12/02/2019.
Translate