Violation Detail
Standard Cited: 19100147 D The control of hazardous energy (lockout/tagout).
Inspection Nr: 1449238.015
Citation: 01002
Citation Type: Serious
Abatement Date: 3
Initial Penalty: $10,603.00
Current Penalty: $10,603.00
Issuance Date: 03/13/2020
Nr Instances: 2
Nr Exposed: 2
Related Event Code (REC):
Gravity: 5
Report ID: 0524700
Contest Date:
Final Order: 04/09/2020
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | Z: Issued | 03/13/2020 | $10,603.00 | Serious |
Text For Citation: 01 Item/Group: 002 Hazard:
29 CFR 1910.147(d): The established procedure for the application of energy control (the lockout or tagout procedures) did not cover the actions listed in and was not done in sequence as required by 29 CFR 1910.147(d)(1)-(6): A) Newman Technology, Inc., located at 100 Cairns Road, Mansfield, OH 44903: On or about December 5, 2019, the employer did not ensure that all the steps outlined in 29 CFR 1910.147(d), required for the control of the hazardous energy sources, were performed. Employees did not control all hazardous energy sources such as, but not limited to, electrical and pneumatic on the Flex Tube Comp (Flex 30) machine (Model # MS14002-5), located in the 1215 Flex Tube Assembly Department, before removing parts that were not ejected onto the chute. Employees were exposed to struck-by and pinch point hazards that could result in serious injuries. B) Newman Technology, Inc., located at 100 Cairns Road, Mansfield, OH 44903: On or about December 5, 2019, the employer did not ensure that all the steps outlined in 29 CFR 1910.147(d), required for the control of the hazardous energy sources, were performed. Employees did not power down the Flex Tube Comp (Flex 30) machine (Model # MS14002-5), located in the 1215 Flex Tube Assembly Department, using established procedures and did not verify that all hazardous energy sources such as, but not limited to, electrical were isolated before cleaning inside the machine. Employees were exposed to struck-by and pinch point hazards that could result in serious injuries.
Translate