Violation Detail
Standard Cited: 19260021 B02 Safety training and education.
Inspection Nr: 1448558.015
Citation: 01001
Citation Type: Other
Abatement Date: 06/05/2020 2
Initial Penalty: $9,446.00
Current Penalty: $5,000.00
Issuance Date: 03/06/2020
Nr Instances: 1
Nr Exposed: 1
Related Event Code (REC): R
Gravity:
Report ID: 0521700
Contest Date:
Final Order: 05/06/2020
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 05/06/2020 | $5,000.00 | 06/05/2020 | Other | |
| Penalty | Z: Issued | 03/06/2020 | $9,446.00 | 03/12/2020 | Serious |
Text For Citation: 01 Item/Group: 001 Hazard:
29 CFR 1926.21(b)(2): The employer did not instruct each employee in the recognition and avoidance of unsafe conditions and the regulations applicable to his/her environment to control or eliminate any hazards or other exposure to illness or injury: a. On or about November 26, 2019, at the above addressed jobsite, an employee wore loose fitting gloves (Boss - Munk), while operating the Skilsaw Worm Drive Circular Saw Model # SPT77W Serial #612003985. A glove came in contact and was pulled into the rotating saw blade, resulting in a partial finger amputation. Employees were not trained in the proper use of circular saws and proper glove selection when using such saws. In accordance with 29 CFR 1913.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition documentation demonstrating that abetment is complete must be included with your certification.
Translate