Violation Detail
Standard Cited: 19100147 D The control of hazardous energy (lockout/tagout).
This violation item has been deleted.
Inspection Nr: 1446261.015
Citation: 01001B
Citation Type: Serious
Abatement Date: 3
Initial Penalty: $0.00
Current Penalty: $0.00
Issuance Date: 01/06/2020
Nr Instances: 1
Nr Exposed: 3
Related Event Code (REC): R
Gravity: 10
Report ID: 0522300
Contest Date:
Final Order: 02/07/2020
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 02/07/2020 | $0.00 | Serious | ||
| Penalty | Z: Issued | 01/06/2020 | $0.00 | Serious |
Text For Citation: 01 Item/Group: 001B Hazard:
29 CFR 1910.147(d): The established procedure for the application of energy control (the lockout or tagout procedures) did not cover the actions listed in and was not done in sequence as required by 29 CFR 1910.147(d)(1)-(6): On or about November 20, 2019, the employer did not ensure the established procedure for the application of energy control (lockout/tagout) covered the following elements and actions and was done in sequence during the removal of the drum pump from the Molteni #3 mixer. Employees did not prepare for the drum pump removal or have knowledge of the type and magnitude of the gravity energy source, [per the 1910.147(d)(1) requirements], Isolating all energy sources [(d)(3)], affixing a lockout device to each energy isolating device [(d)(4)], control the stored energy [(d)(5)], and verify the equipment energy was isolated and de-energized prior to starting work [(d)(6)]. The established procedure did not cover verifying the equipment energy was isolated properly prior to starting work.
Translate