Violation Detail
Standard Cited: 19100147 C04 I The control of hazardous energy (lockout/tagout).
Inspection Nr: 1445212.015
Citation: 01001
Citation Type: Serious
Abatement Date: 03/30/2020 2
Initial Penalty: $13,494.00
Current Penalty: $8,096.40
Issuance Date: 02/24/2020
Nr Instances: 1
Nr Exposed: 1
Related Event Code (REC): R
Gravity: 10
Report ID: 0728500
Contest Date:
Final Order: 03/16/2020
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 03/16/2020 | $8,096.40 | 03/30/2020 | Serious | |
| Penalty | Z: Issued | 02/24/2020 | $13,494.00 | 03/30/2020 | Serious |
Text For Citation: 01 Item/Group: 001 Hazard:
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: Employees were exposed to amputation, crushing and abrasion hazards. The Machine Specific procedures for Lock Out Tag Out for the Shape B5, Acc-u-turn B5 were inadequate as the Standard Operating Instruction for Removing a Wheel Stuck on Punches S11-S15 does not refer back to the Shape B5, Acc-u-turn B5 Lock Out Tag Out Procedures. An employee was not required to utilize lockout tagout procedures when a wheel was stuck to the upper punch retainer tooling when the nitrogen was still turned on to the upper punch retainer tooling. On or about November 5, 2019, an employee received an amputation when the operator's finger got caught between the wheel and the S15 B Shape machine.
Translate