Violation Detail
Standard Cited: 19100147 D The control of hazardous energy (lockout/tagout).
Inspection Nr: 1445165.015
Citation: 01002
Citation Type: Serious
Abatement Date: 04/20/2020 2
Initial Penalty: $13,494.00
Current Penalty: $13,494.00
Issuance Date: 03/25/2020
Nr Instances: 1
Nr Exposed: 1
Related Event Code (REC): R
Gravity: 10
Report ID: 0521700
Contest Date:
Final Order: 04/20/2020
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | Z: Issued | 03/25/2020 | $13,494.00 | 04/20/2020 | Serious |
Text For Citation: 01 Item/Group: 002 Hazard:
29 CFR 1910.147(d): The established procedure for the application of energy control (the lockout or tagout procedures) did not cover the actions listed in and was not done in sequence as required by 29 CFR 1910.147(d)(1)-(6): a) Production Line 1 - On or about November 10, 2019, an employee was exposed to machine hazards associated with moving parts and in-going nip points during servicing of the Line 1 Chain Lug Conveyor, which involved replacing a slipped chain onto a moving sprocket. The employer failed to implement energy control application steps as the machine was not shut down or turn off to perform the servicing work [per the 1910.147(d)(2) requirements]. As a result, the remaining applicable energy control elements, involving machine isolation [(d)(3)], LOTO device application [(d)(4)], dissipation of residual energy [(d)(5)(i)], and verification of isolation [(d)(6)], were not implemented to protect employees from servicing hazards.
Translate