Violation Detail
Standard Cited: 19100147 C02 II The control of hazardous energy (lockout/tagout).
Inspection Nr: 1438587.015
Citation: 01001A
Citation Type: Serious
Abatement Date: 04/30/2020 2
Initial Penalty: $13,494.00
Current Penalty: $7,000.00
Issuance Date: 03/04/2020
Nr Instances: 1
Nr Exposed: 4
Related Event Code (REC): R
Gravity: 10
Report ID: 0418300
Contest Date:
Final Order: 03/30/2020
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 03/30/2020 | $7,000.00 | 04/30/2020 | Serious | |
| Penalty | Z: Issued | 03/04/2020 | $13,494.00 | 03/30/2020 | Serious |
Text For Citation: 01 Item/Group: 001A Hazard:
29 CFR 1910.147(c)(2)(ii): If an energy isolating device is capable of being locked out, the employer's energy control program under paragraph (c)(1) of this section shall utilize lockout, unless the employer can demonstrate that the utilization of a Tagout system will provide full employee protection as set forth in paragraph (c)(3) of this section: (a) On or about 10/01/2019 - Dado Department, employees were exposed to struck-by hazards when they installed a new clamp on the HOMAG BHX 500 Table CNC router because the established LOTO procedure did not include steps for covering testing and/or repair.
Translate