Violation Detail
Standard Cited: 19100305 B01 I Wiring methods, components, and equipment for general use.
Inspection Nr: 1433634.015
Citation: 02005
Citation Type: Other
Abatement Date: 11/22/2019 2
Initial Penalty: $0.00
Current Penalty: $0.00
Issuance Date: 11/12/2019
Nr Instances: 3
Nr Exposed: 4
Related Event Code (REC):
Gravity:
Report ID: 0418600
Contest Date:
Final Order: 12/09/2019
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 12/09/2019 | $0.00 | 11/22/2019 | Other | |
| Penalty | Z: Issued | 11/12/2019 | $0.00 | 11/22/2019 | Other |
Text For Citation: 02 Item/Group: 005 Hazard:
29 CFR 1910.305(b)(1)(i): Conductors entering cutout boxes, cabinets, or fittings were not protected from abrasions: a) Sawmill; On or about September 25, 2019 and at times prior thereto the employer exposed employees to electrical hazards in that employees were required to walk and work around exposed electrical conductors entering a motor connector box on the chip conveyor near the Wood Miser head rig that was not protected from abrasion. b) Sawmill; On or about September 25, 2019 and at times prior thereto the employer exposed employees to electrical hazards in that employees were required to walk and work around exposed electrical conductors pulled loose from flexible conduit at the push button station at the Run around Conveyor; these conductors were not protected from abrasion. c) Sawmill; On or about September 25, 2019 and at times prior thereto the employer exposed employees to electrical hazards in that employees were required to walk and work around exposed electrical conductors coming out of a electrical disconnect near the air compressor; these conductors were not protected from abrasion.
Translate