Violation Detail
Standard Cited: 19100147 D The control of hazardous energy (lockout/tagout).
Inspection Nr: 1417870.015
Citation: 01001C
Citation Type: Serious
Abatement Date: 10/25/2019 2
Initial Penalty: $0.00
Current Penalty: $0.00
Issuance Date: 09/18/2019
Nr Instances: 2
Nr Exposed: 12
Related Event Code (REC):
Gravity: 10
Report ID: 0521100
Contest Date:
Final Order: 10/08/2019
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 10/08/2019 | $0.00 | 10/25/2019 | Serious | |
| Penalty | Z: Issued | 09/18/2019 | $0.00 | 10/25/2019 | Serious |
Text For Citation: 01 Item/Group: 001C Hazard:
29 CFR 1910.147(d): Application of control. The established procedures for the application of energy control (the lockout or tagout procedures) shall cover the following elements and actions and shall be done in the following sequence: a) On or about July 10, 2019 employees were exposed to machine hazards associated with in-running nip points when they were engaged in set-up activities in close proximity to the varnish deck on the DCM Coater in the finishing department. b) On or about May 6, 2019 employees were exposed to machine hazards associated with in-running nip points when they were engaged in cleaning activities in close proximity to the coating roll and the impression roll on the DCM laminator 83. As a result, the remaining applicable energy control elements, involving machine isolation [1910.147(d)(3)], lockout/tagout device application [1910.147(d)(4)], dissipation of residual energy [1910.147(d)(5)(i)] and verification of isolation [1910.147(d)(6)] were not implemented to protect employees from machine servicing hazards.
Translate