Violation Detail
Standard Cited: 19100212 A01 General requirements for all machines.
Inspection Nr: 1396135.015
Citation: 01001
Citation Type: Serious
Abatement Date: 02/13/2020 2
Initial Penalty: $9,282.00
Current Penalty: $9,282.00
Issuance Date: 10/03/2019
Nr Instances: 1
Nr Exposed: 3
Related Event Code (REC): R
Gravity: 10
Report ID: 0521400
Contest Date:
Final Order: 10/30/2019
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | P: Petition to Mod Abatement | $9,282.00 | 02/13/2020 | Serious | ||
| Penalty | Z: Issued | 10/03/2019 | $9,282.00 | 11/01/2019 | Serious |
Text For Citation: 01 Item/Group: 001 Hazard:
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. On or about April 26, 2019 and before, the employer did not ensure that the Faspar machine rolls were guarded in the area where the aluminum goes through the rollers. Employees were exposed to caught-in hazards. This resulted in an employee being severely injured when his hand and arm were caught between the aluminum and the rollers. Abatement documentation is required for this item in accordance with the requirements of 29 CFR 1903.19(d).
Translate