Violation Detail
Standard Cited: 19100179 N03 III A Overhead and gantry cranes.
Inspection Nr: 1390034.015
Citation: 01002C
Citation Type: Serious
Abatement Date: 08/30/2019 2
Initial Penalty: $0.00
Current Penalty: $0.00
Issuance Date: 07/15/2019
Nr Instances: 1
Nr Exposed: 7
Related Event Code (REC):
Gravity: 10
Report ID: 0728900
Contest Date:
Final Order: 08/06/2019
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 08/06/2019 | $0.00 | 08/30/2019 | Serious | |
| Penalty | Z: Issued | 07/15/2019 | $0.00 | 08/08/2019 | Serious |
Text For Citation: 01 Item/Group: 002C Hazard:
29 CFR 1910.179(n)(3)(iii)(a): There is no sudden acceleration or deceleration of the moving load. The employer failed to ensure that overhead loads are not impacting end of travel range of motions from the initial picking up of the part cradles to the robotic welder, and returning to the cradle finish area. This was most recently observed at Tenneco, Inc at 111 Izzak Rd Seward, NE 68434 on April 2, 2019. Hoisted load operations were performed on the FCA line without a cushioning or absorbing device where overhead rail hardware end stop bolts are routinely impacted on each end of the work cell where exhaust assemblies are moved.
Translate