Violation Detail
Standard Cited: 19260404 B01 I Wiring design and protection.
This violation item has been deleted.
Inspection Nr: 1388067.015
Citation: 01002A
Citation Type: Serious
Abatement Date: 3
Initial Penalty: $2,842.00
Current Penalty: $0.00
Issuance Date: 04/04/2019
Nr Instances: 1
Nr Exposed: 2
Related Event Code (REC):
Gravity: 5
Report ID: 0216000
Contest Date:
Final Order: 04/25/2019
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 04/25/2019 | $0.00 | Serious | ||
| Penalty | Z: Issued | 04/04/2019 | $2,842.00 | Serious |
Text For Citation: 01 Item/Group: 002A Hazard:
29 CFR 1926.404(b)(1)(i): General. The employer did not use either ground fault circuit interrupters as specified in paragraph (b)(1)(ii) of this section or an assured equipment grounding conductor program as specified in paragraph (b)(1)(iii) of this section to protect employees on construction sites. These requirements are in addition to any other requirements for equipment grounding conductors: location: garage area on or about: 3/26/19 a) Employees were using electrical equipment, including a Ridgid R45101 table saw and a Skilsaw worm drive saw, while engaged in carpentry work. The employees were not using GFCI protection nor an assured equipment grounding conductor program. NOTE: Because abatement of this violation is already documented in the inspection casefile, the employer need not submit certification or documentation of abatement for this violation as normally required by 29 CFR 1903.19.
Translate