Violation Detail
Standard Cited: 19100212 A03 II General requirements for all machines.
Inspection Nr: 1383663.015
Citation: 01002
Citation Type: Serious
Abatement Date: 3
Initial Penalty: $11,366.00
Current Penalty: $5,600.00
Issuance Date: 06/24/2019
Nr Instances: 1
Nr Exposed: 6
Related Event Code (REC): R
Gravity: 5
Report ID: 0636900
Contest Date:
Final Order: 07/08/2019
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 07/08/2019 | $5,600.00 | Serious | ||
| Penalty | Z: Issued | 06/24/2019 | $11,366.00 | Serious |
Text For Citation: 01 Item/Group: 002 Hazard:
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s). On or about January 21, 2019, and at times prior thereto, the employer did not enforce the use of the installed machine guards or did not ensure that the machines were guarded, to include but not limited to: a) the Victor Lathe 24" guard over the rotating chuck was not utilized, exposing employees to caught-in hazards, and b) the Carlton Drills, did not have guards over the rotating drill bit, exposing employees to caught-in hazards, and c) the Clausing Drill, did not have a guard over or around the rotating drill bit, exposing employees to caught-in hazards.
Translate