Violation Detail
Standard Cited: 19100147 D04 I The control of hazardous energy (lockout/tagout).
Inspection Nr: 1377993.015
Citation: 01002B
Citation Type: Serious
Abatement Date: 06/28/2019 2
Initial Penalty: $5,304.00
Current Penalty: $0.00
Issuance Date: 05/08/2019
Nr Instances: 1
Nr Exposed: 1
Related Event Code (REC): R
Gravity: 10
Report ID: 0522300
Contest Date:
Final Order: 05/30/2019
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 05/30/2019 | $0.00 | 06/28/2019 | Serious | |
| Penalty | Z: Issued | 05/08/2019 | $5,304.00 | 05/28/2019 | Serious |
Text For Citation: 01 Item/Group: 002B Hazard:
29 CFR 1910.147(d)(4)(i): Lockout or tagout devices were not affixed to each energy isolating device by authorized employees: On or about February 13, 2019, an employee was exposed to a machine hazard associated with moving parts and a struck by hazard during a maintenance servicing task while repairing the dry and shine machinery on February 4, 2019, at the Splash Car Wash located at 3405 South Arlington Road Akron, Ohio 44312. The employer failed to implement energy control application steps as LOTO devices were not applied to the electrical disconnect and the air compressor [per the 1910.147(d)(4) requirements]. As a result, the remaining applicable energy control elements, involving dissipation of residual energy [(d)(5)(i)], and verification of isolation [(d)(6)], were not implemented to protect employees from servicing hazards. prepare for shutdown [(d)(1)]; - ensure authorized employee has knowledge of the type, magnitude, the hazard, and the method or means to control the energy; shutdown the machine or equipment [(d)(2)]; machine isolation [(d)(3)]; physically locate and operate all energy isolating devices that are needed to control the energy to the machine or equipment in such a manner as to isolate the machine or equipment from the energy source(s); LOTO device application [(d)(4)]; affix a lockout or tagout device to each energy isolating device; dissipation of residual energy [(d)(5)(i)]; relieve, disconnect, restrain, and otherwise render safe all potentially hazardous stored or residual energy; verification of isolation [(d)(6)]; and verify that isolation and deenergization of the machine or equipment has been accomplished.
Translate