Violation Detail
Standard Cited: 19100212 A03 II General requirements for all machines.
Inspection Nr: 1371363.015
Citation: 01004
Citation Type: Serious
Abatement Date: 07/31/2019 2
Initial Penalty: $9,282.00
Current Penalty: $4,641.00
Issuance Date: 06/06/2019
Nr Instances: 1
Nr Exposed: 15
Related Event Code (REC): R
Gravity: 10
Report ID: 0523400
Contest Date:
Final Order: 06/27/2019
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 06/27/2019 | $4,641.00 | 07/31/2019 | Serious | |
| Penalty | Z: Issued | 06/06/2019 | $9,282.00 | 06/25/2019 | Serious |
Text For Citation: 01 Item/Group: 004 Hazard:
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s): (a) On or about January 10, 2019, employee(s) were exposed to crushing/pinch point hazards and amputation injury while working on and around the Unitrol Solution Welder (Machine BW1, Model #9280D-602 & Serial #S0400508). The point of operation was not properly guarded. (b) On or about January 15, 2019, employees were exposed to crushing/pinch point hazards and amputation injury while working on and around the TAM70 machine. The point of operation was not properly guarded and the interlock was by-passed. (c) On or about January 15, 2019, employees were exposed to crushing/pinch point hazards and amputation injury while working on and around the BAM40 machine. The point of operation and ingoing nip points were not properly guarded. (d) On or about January 15, 2019, employees were exposed to crushing/pinch point hazards and amputation injury while working on and around the BAM20 machine. The point of operation and ingoing nip points were not properly guarded.
Translate