Violation Detail
Standard Cited: 19100212 A03 II General requirements for all machines.
Inspection Nr: 1367514.015
Citation: 01001B
Citation Type: Repeat
Abatement Date: 05/15/2019 2
Initial Penalty: $0.00
Current Penalty: $0.00
Issuance Date: 03/27/2019
Nr Instances: 16
Nr Exposed: 16
Related Event Code (REC):
Gravity: 10
Report ID: 0521100
Contest Date:
Final Order: 04/10/2019
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 04/10/2019 | $0.00 | 05/15/2019 | Repeat | |
| Penalty | Z: Issued | 03/27/2019 | $0.00 | 05/15/2019 | Repeat |
Text For Citation: 01 Item/Group: 001B Hazard:
29 CFR 1910.212(a)(3)(ii): The point of operation of machines whose operation exposes an employee to injury, shall be guarded. The guarding device shall be in conformity with any appropriate standards therefor, or, in the absence of applicable specific standards, shall be so designed and constructed as to prevent the operator from having any part of his body in the danger zone during the operating cycle: On or about December 12, 2018 the machine guarding on Eaton Leonard Bender 2 was not configured to prevent employee exposure to the pinch point hazards created by the pressure bar, collar and/or die components during machine operation. The area scanner positioned on the machine permitted the machine operator to reach the point of operation during the hazardous motion of the machine components. Formrite Companies, Inc. was previously cited for a violation of this Occupational Safety and Health Standard 1910.212(a)(1) which was contained in OSHA inspection number 1078316, citation number 2, item number 1 and was affirmed as a final order on October 14, 2015, with respect to a workplace located at 408 Columbus Street, Two Rivers, WI, 54241.
Translate