Violation Detail
Standard Cited: 19100147 C04 I The control of hazardous energy (lockout/tagout).
Inspection Nr: 1364857.015
Citation: 01001A
Citation Type: Serious
Abatement Date: 04/05/2019 2
Initial Penalty: $9,472.00
Current Penalty: $6,000.00
Issuance Date: 03/05/2019
Nr Instances: 2
Nr Exposed: 23
Related Event Code (REC):
Gravity: 5
Report ID: 0213600
Contest Date:
Final Order: 03/21/2019
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 03/21/2019 | $6,000.00 | 04/05/2019 | Serious | |
| Penalty | Z: Issued | 03/05/2019 | $9,472.00 | 04/05/2019 | Serious |
Text For Citation: 01 Item/Group: 001A Hazard:
29 CFR 1910.147(c)(4)(i): Procedures were not utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: a) On or about 12/07/18 in the Fabrication area; employees who changed dies and set up the hydraulic press #911, were exposed to caught between/amputation hazards, when the employer did not require the use of the written control of hazardous energy procedure for this press attached to the back of the press, Revision A, dated 12/15/08. b) On or about 12/11/18 throughout the facility; employees who performed die set exchanges of hydraulic presses such as but not limited to, MultiPress #5291, #5278, #5279,#5286,#5293, Dennison Multipress #5324, #5070, # 5071, #5008, #435 were exposed to caught between/amputation hazards, when the employer did not require the use of energy control methods. ABATEMENT CERTIFICATION REQUIRED
Translate