Violation Detail
Standard Cited: 19100147 D The control of hazardous energy (lockout/tagout).
Inspection Nr: 1362771.015
Citation: 01002
Citation Type: Serious
Abatement Date: 3
Initial Penalty: $13,260.00
Current Penalty: $9,000.00
Issuance Date: 02/01/2019
Nr Instances: 1
Nr Exposed: 20
Related Event Code (REC): R
Gravity: 10
Report ID: 0521700
Contest Date:
Final Order: 02/28/2019
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 02/28/2019 | $9,000.00 | Serious | ||
| Penalty | Z: Issued | 02/01/2019 | $13,260.00 | Serious |
Text For Citation: 01 Item/Group: 002 Hazard:
29 CFR 1910.147(d): The established procedure for the application of energy control (the lockout or tagout procedures) did not cover the actions listed in and was not done in sequence as required by 29 CFR 1910.147(d)(1)-(6): On or about November 26, 2018, in Building 2 W located at 2 Weather Tech Way in Bolingbrook, Illinois, an employee (material handler) was directed to remove jammed debris from the bottom area of the filtering system in Grinder #1. The employer failed to implement energy control application steps as the machine was not shut down or turned off to perform the servicing work [per the 1910.147(d)(2) requirements]. As a result, the remaining applicable energy control elements, involving machine isolation [(d)(3)], LOTO device application [(d)(4)], dissipation of residual energy [(d)(5)(i)], and verification of isolation [(d)(6)], were not implemented to protect the employee from machine servicing hazards. The employee was thereby exposed to the hazards associated with moving parts.
Translate