Violation Detail
Standard Cited: 19100147 D The control of hazardous energy (lockout/tagout).
Inspection Nr: 1359767.015
Citation: 01002
Citation Type: Serious
Abatement Date: 3
Initial Penalty: $13,260.00
Current Penalty: $8,840.00
Issuance Date: 03/01/2019
Nr Instances: 1
Nr Exposed: 3
Related Event Code (REC): A;R
Gravity: 10
Report ID: 0521400
Contest Date: 03/27/2019
Final Order: 05/28/2020
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | F: Formal Settlement | 05/28/2020 | $8,840.00 | Serious | ||
| Penalty | C: Contested | 04/02/2019 | $13,260.00 | Serious | ||
| Penalty | Z: Issued | 03/01/2019 | $13,260.00 | Serious |
Text For Citation: 01 Item/Group: 002 Hazard:
29 CFR 1910.147(d): The established procedure for the application of energy control (the lockout or tagout procedures) did not cover the actions listed in and was not done in sequence as required by 29 CFR 1910.147(d)(1)-(6). On or about November 1, 2018, the employer did not ensure that employees performing sanitizing operation were required to perform the following sequence of actions prior to servicing the machine: (1) prepare for shutdown, (2) shut down machine or equipment, (3) physically locate and operate energy isolating devices in such a manner as to isolate the machine or equipment from the energy source, (4) affix lockout or tagout devices to each energy isolating device by authorized employee, (5) relieve, disconnect, restrain or otherwise render safe all stored or residual energy, (6) verify that isolation and de-energization of the machine or equipment have been accomplished prior to starting work. There is no abatement certification or documentation required for this item.
Translate