Violation Detail
Standard Cited: 19260702 J01 Requirements for equipment and tools.
This violation item has been deleted.
Inspection Nr: 1345237.015
Citation: 01003
Citation Type: Serious
Abatement Date: 12/06/2018
Initial Penalty: $9,054.00
Current Penalty: $0.00
Issuance Date: 11/16/2018
Nr Instances: 1
Nr Exposed: 2
Related Event Code (REC):
Gravity: 10
Report ID: 0522000
Contest Date:
Final Order: 12/04/2018
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 12/04/2018 | $0.00 | 12/06/2018 | Serious | |
| Penalty | Z: Issued | 11/16/2018 | $9,054.00 | 12/06/2018 | Serious |
Text For Citation: 01 Item/Group: 003 Hazard:
29 CFR 1926.702(j)(1): No employee shall be permitted to perform maintenance or repair activity on equipment (such as compressors mixers, screens or pumps used for concrete and masonry construction activities) where the inadvertent operation of the equipment could occur and cause injury, unless all potentially hazardous energy sources have been locked out and tagged. On September 10, 2018, an employee was struck by the boom and was thrown off the 2nd floor decking prior to attempting the removal of a concrete blockage that was under pressure located on or near the reducer of a Concord Concrete Pump Truck Model# CCP-50XZ-170 in that the air had not been locked out or tagged out. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence, or written records.
Translate