Violation Detail
Standard Cited: 19100212 A03 II General requirements for all machines.
Inspection Nr: 1331524.015
Citation: 01001
Citation Type: Serious
Abatement Date: 3
Initial Penalty: $9,054.00
Current Penalty: $5,432.40
Issuance Date: 10/01/2018
Nr Instances: 1
Nr Exposed: 5
Related Event Code (REC): R
Gravity: 10
Report ID: 0728500
Contest Date:
Final Order: 10/23/2018
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 10/23/2018 | $5,432.40 | Serious | ||
| Penalty | Z: Issued | 10/01/2018 | $9,054.00 | Serious |
Text For Citation: 01 Item/Group: 001 Hazard:
29 CFR 1910.212(a)(3)(ii): Point of operation guards were not designed and constructed as to prevent the operator from having any part of their body in the danger zone during the operating cycle: On July 10,2018, in the Sheet Metal Shop Area of the facility located in Cassville, MO., an employee was exposed to serious crushing injuries to the hands and fingers, in that the fixed guard on the Hydraulic Shear was not affixed in a manner to prevent injuries to the operators. An employee was able to place his fingers under the guard and into the danger zone of the cycling hold down clamp assembly of the machine. As a result, his left middle finger was badly crushed and resulted in a partial amputation.
Translate