Violation Detail
Standard Cited: 19100147 D The control of hazardous energy (lockout/tagout).
Inspection Nr: 1317284.015
Citation: 01001C
Citation Type: Serious
Abatement Date: 07/24/2018 2
Initial Penalty: $0.00
Current Penalty: $0.00
Issuance Date: 07/03/2018
Nr Instances: 1
Nr Exposed: 2
Related Event Code (REC):
Gravity: 5
Report ID: 0522300
Contest Date:
Final Order: 07/26/2018
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 07/26/2018 | $0.00 | 07/24/2018 | Serious | |
| Penalty | Z: Issued | 07/03/2018 | $0.00 | 07/24/2018 | Serious |
Text For Citation: 01 Item/Group: 001C Hazard:
29 CFR 1910.147(d): The established procedure for the application of energy control (the lockout or tagout procedures) did not cover the actions listed in, and was not done in sequence as required by 29 CFR 1910.147(d)(1)-(6): On or about 5/13/18, the employer failed ensure the following steps were taken when employees were conducting unjamming activities on machinery, including, but not limited to Line A Cooler "Load On" and "Load Off". (Note: all steps are to be done by an authorized employee(s)): 1) Prepare for shutdown, 2) Shutdown machine or equipment, 3) Machine/equipment isolation, 4) Apply lockout device(s), 5) Relieve potentially hazardous energy sources, and 6) Verify energy isolation.
Translate