Violation Detail
Standard Cited: 19100212 A01 General requirements for all machines.
Inspection Nr: 1309050.015
Citation: 01002
Citation Type: Serious
Abatement Date: 09/25/2018 2
Initial Penalty: $7,317.00
Current Penalty: $4,024.35
Issuance Date: 08/31/2018
Nr Instances: 5
Nr Exposed: 12
Related Event Code (REC): R
Gravity: 5
Report ID: 0521100
Contest Date:
Final Order: 09/20/2018
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 09/20/2018 | $4,024.35 | 09/25/2018 | Serious | |
| Penalty | Z: Issued | 08/31/2018 | $7,317.00 | 09/25/2018 | Serious |
Text For Citation: 01 Item/Group: 002 Hazard:
29 CFR 1910.212(a)(1): Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are-barrier guards, two-hand tripping devices, electronic safety devices, etc.: a) On or about April 16, 2018 on Auto-bender 906 the pulleys on the tension arm for the wire feed was not guarded to prevent exposure to pinch point hazards created the tensioned wire. b) On or about April 16, 2018 on Auto-bender 908 the pulleys on the tension arm for the wire feed was not guarded to prevent exposure to pinch point hazards created the tensioned wire.
Translate