Violation Detail
Standard Cited: 19100147 D03 The control of hazardous energy (lockout/tagout).
This violation item has been deleted.
Inspection Nr: 1296388.015
Citation: 02001
Citation Type: Other
Abatement Date: 05/21/2018 2
Initial Penalty: $0.00
Current Penalty: $0.00
Issuance Date: 04/17/2018
Nr Instances: 1
Nr Exposed: 4
Related Event Code (REC):
Gravity:
Report ID: 0522500
Contest Date:
Final Order: 05/14/2018
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 05/14/2018 | $0.00 | 05/21/2018 | Other | |
| Penalty | Z: Issued | 04/17/2018 | $0.00 | 05/21/2018 | Other |
Text For Citation: 02 Item/Group: 001 Hazard:
29 CFR 1910.147(d)(3): Machine or equipment isolation. All energy isolating devices that are needed to control the energy to the machine or equipment shall be physically located and operated in such a manner as to isolate the machine or equipment from the energy source(s). The employer did not ensure that energy isolation devices were operated to isolate machinery or equipment from their energy source(s) and had energy isolation devices affixed by authorized employees. a. On or about February 21, 2018. located in the Machining Department on Rod Line #3 at the Hex Machine, the employer did not ensure that employees implemented energy control procedures prior to entering the confines of the Hex Machine to perform the set-up activity when changing out the Hex Jigs. The machine was not isolated from energy sources prior to engaging in this service and maintenance activity. As a result, the remaining applicable energy control elements, involving lock-out/tag-out device application [1910.147(d)(4)], dissipation of residual energy [1910.147(d)(5)(i)], and verification of isolation [1910.147(d)(6)], were not implemented.
Translate