Violation Detail
Standard Cited: 19100028 B01 I Duty to have fall protection and falling object protection.
This violation item has been deleted.
Inspection Nr: 1296266.015
Citation: 01001
Citation Type: Serious
Abatement Date: 06/27/2018 2
Initial Penalty: $7,391.00
Current Penalty: $0.00
Issuance Date: 06/07/2018
Nr Instances: 3
Nr Exposed: 10
Related Event Code (REC):
Gravity: 5
Report ID: 0625400
Contest Date: 06/28/2018
Final Order: 09/09/2019
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | F: Formal Settlement | 09/09/2019 | $0.00 | 06/27/2018 | Serious | |
| Penalty | C: Contested | 07/02/2018 | $7,391.00 | 06/27/2018 | Serious | |
| Penalty | Z: Issued | 06/07/2018 | $7,391.00 | 06/27/2018 | Serious |
Text For Citation: 01 Item/Group: 001 Hazard:
29 CFR 1910.28(b)(1)(i): The employer did not ensure that each employee on a walking-working surface with an unprotected side or edge that was 4 feet (1.2 m) or more above a lower level was protected from falling by one or more of the following: Guardrail systems, safety net systems, or personal fall arrest systems: On or about February 20, 2018, at the Contech collator machines the elevated walking platforms were not guarded on the inside to prevent a fall. There was no top railing on all three machines to prevent the employees from falling to the lower level. Employees exposed to a fall hazard greater than 4 feet to the cement floor below.
Translate