Violation Detail
Standard Cited: 19100147 D The control of hazardous energy (lockout/tagout).
Inspection Nr: 1276870.015
Citation: 01001C
Citation Type: Serious
Abatement Date: 04/30/2018 2
Initial Penalty: $0.00
Current Penalty: $0.00
Issuance Date: 04/04/2018
Nr Instances: 1
Nr Exposed: 2
Related Event Code (REC): R
Gravity: 5
Report ID: 0524200
Contest Date: 04/27/2018
Final Order: 08/13/2018
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | F: Formal Settlement | 08/13/2018 | $0.00 | 04/30/2018 | Serious | |
| Penalty | C: Contested | 05/07/2018 | $0.00 | 04/30/2018 | Serious | |
| Penalty | Z: Issued | 04/04/2018 | $0.00 | 04/30/2018 | Serious |
Text For Citation: 01 Item/Group: 001C Hazard:
29 CFR 1910.147(d): The established procedure for the application of energy control (the lockout or tagout procedures) did not cover the actions listed in and was not done in sequence as required by 29 CFR 1910.147(d)(1)-(6): a) Machine Shop - On or about November 6, 2017, an employee was exposed to machine hazards associated with moving parts while performing a servicing and maintenance task of filing debris from the chuck jaws on the Mori-Seiki Lathe Machine, model #SL-25B, serial #3775. The employer failed to implement energy control application steps as the machine was not shut down or turned off out to perform the servicing work [per the 1910.147(d)(2) requirements]. As a result, the remaining applicable energy control elements, involving machine isolation [(d)(3)], LOTO device application [(d)(4)], dissipation of residual energy [(d)(5)(i)], and verification of isolation [(d)(6)], were not implemented to protect the employee from machine servicing hazards.
Translate