Violation Detail
Standard Cited: 19100147 C04 II The control of hazardous energy (lockout/tagout).
Inspection Nr: 1275888.015
Citation: 01003
Citation Type: Other
Abatement Date: 05/21/2018 2
Initial Penalty: $0.00
Current Penalty: $0.00
Issuance Date: 04/09/2018
Nr Instances: 1
Nr Exposed: 3
Related Event Code (REC):
Gravity:
Report ID: 0521400
Contest Date:
Final Order: 05/04/2018
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 05/04/2018 | $0.00 | 05/21/2018 | Other | |
| Penalty | Z: Issued | 04/09/2018 | $0.00 | 05/07/2018 | Other |
Text For Citation: 01 Item/Group: 003 Hazard:
29 CFR 1910.147(c)(4)(ii): Procedures did not clearly and specifically outline the scope, purpose, authorization, rules, and techniques to be utilized for the control of hazardous energy, and the means to enforce compliance including, but not limited to, 29 CFR 1910.147(c)(4)(ii)(A), (c)(4)(ii)(B), (c)(4)(ii)(C) and (c)(4)(ii)(D): On or about November 1, 2017 through February 14, 2018, the procedure that was in place for maintaining, inspecting grinders did not address a specific method to perform verification of isolation of hydraulic and electrical energy including rendering safe all stored energy prior to starting work on the machine. The procedure also did not contain a specific statement for intended use during inspection of the hopper or other components, including the air lock (rotary valve). Abatement documentation is required for this item in accordance with the requirements of 29 CFR 1903.19(d).
Translate