Violation Detail
Standard Cited: 19100147 C04 I The control of hazardous energy (lockout/tagout).
Inspection Nr: 1271041.015
Citation: 01001A
Citation Type: Serious
Abatement Date: 05/05/2018 2
Initial Penalty: $12,675.00
Current Penalty: $8,238.75
Issuance Date: 02/01/2018
Nr Instances: 3
Nr Exposed: 35
Related Event Code (REC): C;R
Gravity: 10
Report ID: 0521100
Contest Date:
Final Order: 02/13/2018
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 02/13/2018 | $8,238.75 | 05/05/2018 | Serious | |
| Penalty | Z: Issued | 02/01/2018 | $12,675.00 | 03/02/2018 | Serious |
Text For Citation: 01 Item/Group: 001A Hazard:
29 CFR 1910.147(c)(4)(i): Procedures shall be developed, documented and utilized for the control of potentially hazardous energy when employees are engaged in the activities covered by this section: a) On or about September 16, 2017, a Machine Operator Trainee received a hand injury while removing material from the "Goober Pad" under the Die Lip on Line #26. The Machine Operator Trainee was injured when 3 fingers of his left hand were caught in the Die Roll Stand ingoing nip point. The employer had not developed and implemented energy control procedures or provided alternative measures which provide effective protection for employees removing material from the "Goober Pad" or replacing the "Goober Pad" during production runs. b) On or about October 18, 2017, the employer had not developed and implemented energy control procedures or provided alternative measures which provide effective protection for Line 21, 22, 23, 24, 25, 26, 27, 28 and 29 Machine Operators adjusting the Die Width Bolts and cleaning excess material from die lips from the Die Roll Stand ingoing nip point. c) On or about November 30, 2017, the employer had not developed and implemented energy control procedures or provided alternative measures which provide effective protection for Machine Operators adjusting circular blades, adjusting the collars on the idler roller and changing the trim material width near the Line 21, 22, 24, 25, 27, 28 and 29 Maxon ingoing nip points when making production changes.
Translate