Violation Detail
Standard Cited: 19100212 A01 General requirements for all machines.
Inspection Nr: 1249999.015
Citation: 01001
Citation Type: Serious
Abatement Date: 01/31/2018 2
Initial Penalty: $11,086.00
Current Penalty: $6,652.00
Issuance Date: 01/19/2018
Nr Instances: 5
Nr Exposed: 8
Related Event Code (REC):
Gravity: 5
Report ID: 0214700
Contest Date:
Final Order: 02/15/2018
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 02/15/2018 | $6,652.00 | 01/31/2018 | Serious | |
| Penalty | Z: Issued | 01/19/2018 | $11,086.00 | 01/31/2018 | Serious |
Text For Citation: 01 Item/Group: 001 Hazard:
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, and rotating parts: a) Worksite: The employer did not ensure that Bonko Controls - Machine Technologies & Control, Inc. Straightener #3, Asset #2593, Equipment #ST03, Serial #501 187 was equipped with adequate rotating part guarding to prevent employees from having any part of their body enter into the danger zone during the operating process. The machine was able to be operated with rotating parts exposed; on or about 7/24/17. b) Worksite: The employer did not ensure that Bonko Controls - Machine Technologies & Control, Inc. Straightener #2, Asset #2591, Equipment #ST01, Serial #501 185 was equipped with adequate rotating part guarding to prevent employees from having any part of their body enter into the danger zone during the operating process. The machine was able to be operated with rotating parts exposed; on or about 7/25/17. c) Worksite: The employer did not ensure that Bonko Controls - Machine Technologies & Control, Inc. Straightener #3, Asset #2593, Equipment #ST03, Serial #501 187 was equipped with adequate rotating part guarding to prevent employees from having any part of their body enter into the danger zone during the operating process. The machine was able to be operated with rotating parts exposed; on or about 7/25/17. d) Worksite: The employer did not ensure that Bonko Controls - Machine Technologies & Control, Inc. Straightener #4, Asset #2594, Equipment #ST04, Serial #501 188 was equipped with adequate rotating part guarding to prevent employees from having any part of their body enter into the danger zone during the operating process. The machine was able to be operated with rotating parts exposed; on or about 7/25/17. e) Worksite: The employer did not ensure that Bonko Controls - Machine Technologies & Control, Inc. Straightener #5, Asset #2595, Equipment #ST05, Serial #501 189 was equipped with adequate rotating part guarding to prevent employees from having any part of their body enter into the danger zone during the operating process. The machine was able to be operated with rotating parts exposed; on or about 7/25/17. Note: The employer is required to submit abatement certification for this item in accordance with 29 CFR 1903.19.
Translate