Text For Citation: 02 Item/Group: 011 Hazard:

29 CFR 1910.272(m)(1)(i): Regularly scheduled inspections of at least the mechanical and safety control equipment associated with dryers, grain stream processing equipment, dust collection equipment including filter collectors, and bucket elevators were not accomplished: Employer did not adequately complete, or completed but did not adequately document, the regularly scheduled inspections pertaining to certain of the mechanical equipment on the South Bauermeister GM-120 gap mill (Employer ID# M13030) located on the first floor of B mill, as follows: a) Quarterly inspections are not getting completed, or are getting completed but not adequately documented, within the employer's established time frame. This violation occured in 2017 at the Cambria, WI dry corn milling facility. b) Certain steps as outlined in the employer's preventative maintenance procedures within weekly, monthly, and quarterly inspections that required the equipment to be shut down are not being performed, or are being performed but are not being adequately documented. This violation occurred in 2017 at the Cambria, WI dry corn milling facility. To abate this violation, the employer must implement preventative maintenance procedures consisting of performance of regularly scheduled inspections of the mechanical equipment associated with covered equipment such as dryers, grain stream processing equipment, dust collection equipment including filter collectors, and bucket elevators.