Violation Detail
Standard Cited: 19100213 R03 Woodworking machinery requirements.
Inspection Nr: 1209948.015
Citation: 01001
Citation Type: Serious
Abatement Date: 06/02/2017 2
Initial Penalty: $3,078.00
Current Penalty: $2,500.00
Issuance Date: 05/15/2017
Nr Instances: 1
Nr Exposed: 13
Related Event Code (REC): R
Gravity: 5
Report ID: 0830500
Contest Date:
Final Order: 06/21/2017
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 06/21/2017 | $2,500.00 | 06/02/2017 | Serious | |
| Penalty | Z: Issued | 05/15/2017 | $3,078.00 | 06/02/2017 | Serious |
Text For Citation: 01 Item/Group: 001 Hazard:
29 CFR 1910.213(r)(3): For combination or universal woodworking machines, each point of operation of any tool was not guarded as required for such a tool in a separate machine: (a) Heartwood Custom Woodworks, Inc., 725 Chambers Ave Bldg C, Eagle, CO 81631: On and before February 9, 2017 the employer did not ensure that the point of operation on the Copecrafter tool was guarded. This tool was used in combination with the shapers in the shop. An employee was injured when positioning a piece of wood of less than 7 inches under the pneumatic clamp. This condition lead to a partial fingertip amputation.
Translate