Violation Detail
Standard Cited: 19100217 C03 VIII C Mechanical power presses.
Inspection Nr: 1205576.015
Citation: 01004B
Citation Type: Serious
Abatement Date: 04/18/2017 2
Initial Penalty: $0.00
Current Penalty: $0.00
Issuance Date: 03/03/2017
Nr Instances: 2
Nr Exposed: 1
Related Event Code (REC):
Gravity: 10
Report ID: 0112300
Contest Date:
Final Order: 03/21/2017
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 03/21/2017 | $0.00 | 04/18/2017 | Serious | |
| Penalty | Z: Issued | 03/03/2017 | $0.00 | 04/18/2017 | Serious |
Text For Citation: 01 Item/Group: 004B Hazard:
29 CFR 1910.217(c)(3)(viii)(c): The safety distance (D(m)) between the two-hand trip and the point of operation was not greater than the distance determined by the following formula: D(m) = 63 inches/second X T(m); where: D(m) = minimum safety distance (inches); 63 inches/second=hand speed constant; and T(m) = the maximum time the press takes for the die closure after it has been tripped (seconds). For full revolution clutch presses with only one engaging point T(m) is equal to the time necessary for one and one-half revolutions of the crankshaft. For full revolution clutch presses with more than one engaging point, T(m) shall be calculated as follows: T(m) = [1/2 + (1 divided by Number of engaging points per revolution)] X time necessary to complete one revolution of the crankshaft (seconds). (a) Worksite: On or about 1/26/2017, the employer did not ensure that two-hand trip systems on the Bliss mechanical power presses were positioned at a safe distance from the point of operation.
Translate