Violation Detail
Standard Cited: 19260021 B02 Safety training and education.
This violation item has been deleted.
Inspection Nr: 1169527.015
Citation: 01001
Citation Type: Serious
Abatement Date: 01/13/2017
Initial Penalty: $12,471.00
Current Penalty: $0.00
Issuance Date: 12/16/2016
Nr Instances: 1
Nr Exposed: 3
Related Event Code (REC): A
Gravity: 10
Report ID: 0729700
Contest Date: 12/21/2016
Final Order: 04/21/2017
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | F: Formal Settlement | 04/21/2017 | $0.00 | 01/13/2017 | Serious | |
| Penalty | C: Contested | 02/03/2017 | $12,471.00 | 01/13/2017 | Serious | |
| Penalty | Z: Issued | 12/16/2016 | $12,471.00 | 01/13/2017 | Serious |
Text For Citation: 01 Item/Group: 001 Hazard:
29 CFR 1926.21(b)(2): The employer did not instruct each employee in the recognition and avoidance of unsafe conditions and the regulations applicable to his/her environment to control or eliminate any hazards or other exposure to illness or injury: The employer is failing to protect employees from electrocution hazards when working near energized power lines. This was most recently documented on or about August 12, 2016, in Andover, Kansas, where an employee engaged in construction activities, using a Sky Power 600 SJ - serial #0300076581 JLG aerial lift, did not receive job site specific training and instruction in the recognition and avoidance of unsafe conditions such as but not limited to the avoidance of overhead hazards and electrical hazards. 29 CFR 1903.19(d)(1) requires certification and documentation that the abatement of the above violation is complete.
Translate