Violation Detail
Standard Cited: 5A0001 OSH Act General Duty Paragraph
Inspection Nr: 116136599
Citation: 01001
Citation Type: Serious
Abatement Date: 07/14/1997 X
Initial Penalty: $2,800.00
Current Penalty: $1,400.00
Issuance Date: 05/27/1997
Nr Instances: 1
Nr Exposed: 3
Related Event Code (REC):
Gravity: 10
Report ID: 0112000
Contest Date:
Final Order:
Emphasis:
Substance: 8110
Substance: 8111
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 06/11/1997 | $1,400.00 | 07/14/1997 | Serious | |
| Penalty | Z: Issued | 05/27/1997 | $2,800.00 | 07/14/1997 | Serious |
Text For Citation: 01 Item/Group: 001 Hazard: GUARDING
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to, in-going nip points from feed mechanism: Or in the Alternative: 29 CFR 1910.212(a)(1): Machine guarding was not provided to protect operators and other employees from hazards created by in-going nip points, and the absence of the safety control bar: JOBSITE: THE QUICK STOP AND REVERSING DEVICE REQUIRED ON THE CHIPPER, AS SUPPLIED BY THE MANUFACTURER AND REQUIRED UNDER ANSI STANDARD Z133.1-1994 6.3.4. WAS NOT PRESENT.
Translate