Violation Detail
Standard Cited: 19100036 G02 Design and construction requirements for exit routes.
Inspection Nr: 1121252.015
Citation: 01001
Citation Type: Serious
Abatement Date: 08/24/2016 2
Initial Penalty: $2,400.00
Current Penalty: $2,400.00
Issuance Date: 07/29/2016
Nr Instances: 1
Nr Exposed: 1
Related Event Code (REC): A
Gravity: 5
Report ID: 0213400
Contest Date:
Final Order: 08/23/2016
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | Z: Issued | 07/29/2016 | $2,400.00 | 08/24/2016 | Serious |
Text For Citation: 01 Item/Group: 001 Hazard:
29 CFR 1910.36(g)(2): The exit access route was not at least 28 inches wide (71.1 cm) wide at all points. a/Advance Machine, Inc./Linden, NJ Site: Northeast corner of the shop. A minimum width of 28 inches of the exit access route was not maintained at the employees work station the aisle near the Engine lathe is blocked by raw metal stock. Observed on or about 01/29/2016. b) Advance Machine, Inc./Linden, NJ Site: milling shop area. A minimum width of 28 inches of the exit access route was not maintained. Raw metal stock were stored in the exit access route exposing employees to tripping hazards while exiting the shop during an emergency. Requiring employees to step over the product. Observed on or about 07/25/2016
Translate